| DISPLACEMENT TYPE | CONSTANT |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 2900.0 |
| CONNECTION TYPE | INLET AND |
| OUTLET |
| MOUNTING TYPE | FLANGE |
| CONNECTION QUANTITY | 2 |
| CONNECTION DESIGN | THREADED |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| MATERIAL | STEEL HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| TORQUE LOAD RATING | 81.0 INCH-POUNDS |
| CONNECTION GOVERNMENT SPEC/STD | MS33649-4 |
| THREAD SIZE | 0.437-20 |
| SCREW THREAD SERIES DESIGNATOR | UNJF |
| THREAD LOCATION | INTERNAL |
| THREAD DIRECTION | RIGHT-HAND |
| SPLINE QUANTITY | 12 |
| SPLINE MAJOR DIAMETER | 0.406 INCHES MINIMUM AND |
| 0.414 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 0.353 INCHES MINIMUM AND |
| 0.356 INCHES MAXIMUM |
| SPLINE PITCH | 32/64 |
| PITCH DIAMETER | 0.375 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE LENGTH | 0.350 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING BOLT CIRCLE DIAMETER | 3.000 INCHES NOMINAL |
| MOUNTING BOLT HOLE SPACING | 2.100 IN. BY 2.100 IN. |
| MOUNTING HOLE DIAMETER | 0.276 INCHES MINIMUM AND |
| 0.291 INCHES MAXIMUM |
| FSC APPLICATION DATA | HYDRAULIC SYSTEM,MOTOR GEAR ASSEMBLY,WING FOLD,ACFT |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY A SOURCE CONTROLLED DRAWING |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 82402 |
| MFR SOURCE CONTROLLING REFERENCE | 42251R33 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 62983 |
| DESIGN CONTROL REFERENCE | CMF3-022-3A |