| III CUBIC MEASURE | 4732,3 CUBIC CENTIMETERS |
| III MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55,0 |
| III SPECIAL HANDLING FEATURE | CORROSIVE AND MAGNETIC |
| III TERMINAL QUANTITY | 3 AND 1 |
| III TERMINAL TYPE | THREADED STUD AND CONNECTOR, RECEPTACLE |
| III UNPACKAGED UNIT WIDTH | 172,0 MILLIMETERS NOMINAL |
| III UNPACKAGED UNIT HEIGHT | 172,5 MILLIMETERS NOMINAL |
| III UNPACKAGED UNIT LENGTH | 159,5 MILLIMETERS NOMINAL |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 13500 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 1000 |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES |
| RECTIFIER LOCATION | INTEGRAL |
| SECOND STEP DIAMETER | 17,0 MILLIMETERS NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| SPECIAL FEATURES | MIT KLEMME W |
| VOLTAGE IN VOLTS | 14,0 |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD DIAMETER | 16,0 MILLIMETERS NOMINAL |
| THREAD LENGTH | 14,0 MILLIMETERS NOMINAL |
| THREAD PITCH IN MILLIMETERS | 1,5 |
| THREAD SERIES | ISO M |
| TOP MOUNTING HOLE DIAMETER | 8,2 MILLIMETERS NOMINAL |
| UNTHREADED PORTION LENGTH | 18,0 MILLIMETERS NOMINAL |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 56,0 MILLIMETERS NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180,0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 120,0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 6000 |
| BOTTOM MOUNTING HOLE DIAMETER | 8,2 MILLIMETERS NOMINAL |
| FURNISHED ITEMS | CAPACITOR AND NUT AND WOODRUFF KEY AND VOLTAGE REGULATOR AND LOCKWASHER |
| GROUND POLARITY TYPE | NEGATIVE |
| GROUNDING METHOD | INTERNAL |