|
|
|
National Stock Number:
3020-00-291-6191
Federal Supply Class:
3020
National Item Identification Number:
002916191
Description:
GEAR,SPUR
Detail:
A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also GEAR, ANTIBACKLASH, SPUR. For bulk material, see ROD, PINION.
|
Manufacturer Information:
| 117D2072 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| BODY STYLE | WEBBED, OFFSET, SOLID | | BORE NOMINAL DIAMETER | 0.5313 INCHES FIRST END | | BORE STYLE | STRAIGHT SPLINE BOTH ENDS | | FACE NOMINAL WIDTH | 0.260 INCHES | | FIRST GROOVE NOMINAL DIAMETER | 0.944 INCHES FIRST END | | FIRST GROOVE NOMINAL WIDTH | 0.042 INCHES FIRST END | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HUB NOMINAL DIAMETER | 0.9839 INCHES FIRST END | | HUB NOMINAL DIAMETER | 0.950 INCHES SECOND END | | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END | | HUB STYLE DESIGNATOR | PLAIN SECOND END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | PITCH DIAMETER | 2.6667 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.102 INCHES FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.310 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.830 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.821 INCHES | | PRESSURE ANGLE | 20.0000 DEGREES | | SPECIAL FEATURES | COUNTERBORE 1ST END,1.340 IN. DEEP BY 0.944 IN. DIA | | SPLINE QUANTITY | 18 BOTH ENDS | | STYLE DESIGNATOR | PROTRUDING HUBS | | TEETH QUANTITY | 32 | | TOOTH FORM | STANDARD |
|
|