| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.094 INCHES |
| FLANGE NOMINAL DIAMETER | 0.250 INCHES |
| FLANGE NOMINAL THICKNESS | 0.125 INCHES |
| HUB NOMINAL DIAMETER | 0.188 INCHES BETWEEN BODY AND FLANGE |
| HUB NOMINAL DIAMETER | 0.188 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303SE,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303SE OVERALL |
| PITCH DIAMETER | 0.2073 INCHES MINIMUM AND 0.2083 INCHES MAXIMUM |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 AXIALLY THROUGH FLANGE |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) AXIALLY THROUGH FLANGE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED AXIALLY THROUGH FLANGE |
| NOMINAL DISTANCE BETWEEN OUTER BODY FACE AND INNER FLANGE FACE | 0.125 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.228 INCHES |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | FLANGED END |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 20 |
| TOOTH FORM | STANDARD |