| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| HUB NOMINAL DIAMETER | 0.250 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| PITCH DIAMETER | 0.6860 INCHES MINIMUM AND 0.6870 INCHES MAXIMUM |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.073 INCHES AXIALLY THROUGH BODY FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 72 AXIALLY THROUGH BODY FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH BODY FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED AXIALLY THROUGH BODY FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.115 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.718 INCHES |
| NOMINAL OVERALL LENGTH | 0.240 INCHES |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 44 |
| TOOTH FORM | STANDARD |