| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| END NOMINAL DIAMETER | 0.210 INCHES FIRST END |
| END NOMINAL LENGTH | 0.173 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.093 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.375 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.015 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.210 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| PITCH DIAMETER | 0.9380 INCHES NOMINAL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.188 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.977 INCHES |
| NOMINAL OVERALL LENGTH | 0.281 INCHES |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE FLUSH HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 45 |
| TOOTH FORM | STANDARD |