|
|
|
National Stock Number:
3040-01-325-3330
Federal Supply Class:
3040
National Item Identification Number:
013253330
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 114C2730-2 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 114C2730-3 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.031 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.3590 INCHES NOMINAL | | FIRST END DIAMETER | 0.4980 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | FIRST END GROOVE WIDTH | 0.0390 INCHES NOMINAL | | FSC APPLICATION DATA | HOISTING ADAPTERAIRCRAFT | | LARGEST STEP DIAMETER | 0.740 INCHES NOMINAL | | OVERALL LENGTH | 6.100 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END EXTERNAL THREAD LENGTH | 0.370 INCHES NOMINAL | | SECOND END DIAMETER | 0.5000 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | STEP QUANTITY | 8 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|