|
|
|
National Stock Number:
3040-17-108-3452
Federal Supply Class:
3040
National Item Identification Number:
171083452
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| T003001449 | H0R68 | LIPS PROPTECH B.V. | | T003001449 | H1512 | WARTSILA NETHERLANDS |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 64.8 MILLIMETERS MINIMUM AND 65.0 MILLIMETERS MAXIMUM | | FIRST END DISTANCE FROM END TO GROOVE | 10.35 MILLIMETERS NOMINAL | | FIRST END GROOVE DIAMETER | 61.7 MILLIMETERS MINIMUM AND 62.0 MILLIMETERS MAXIMUM | | FIRST END GROOVE WIDTH | 2.65 MILLIMETERS MINIMUM AND 2.8 MILLIMETERS MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 70.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL COMP 1.0501 | | OVERALL LENGTH | 261.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 64.8 MILLIMETERS MINIMUM AND 65.0 MILLIMETERS MAXIMUM | | SECOND END GROOVE DIAMETER | 61.7 MILLIMETERS MINIMUM AND 62.0 MILLIMETERS MAXIMUM | | SECOND END GROOVE WIDTH | 2.65 MILLIMETERS MINIMUM AND 2.8 MILLIMETERS MAXIMUM | | SECOND END INTERNAL THREAD LENGTH | 18.0 MILLIMETERS NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 10.35 MILLIMETERS NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND INTERNALLY THREADED |
|
|