| DISTANCE BETWEEN FLANGE HOLE CENTERS | 75.0 MILLIMETERS NOMINAL |
| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 40.0 MILLIMETERS NOMINAL |
| FLANGE OUTSIDE DIAMETER | 86.0 MILLIMETERS NOMINAL |
| FLANGE WIDTH | 1.5 MILLIMETERS NOMINAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | AIR 4210B-G354 MIL STD SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | F A 35-551 NATIONAL SPEC SINGLE MATERIAL RESPONSE ALIGNMENT RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | NF A 35-365 NATIONAL SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | NF A 35-565 NATIONAL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | NF A 35-565 NATIONAL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 100C6 BALL |
| MATERIAL | STEEL COMP 100C6 INNER RING |
| MATERIAL | STEEL COMP 100C6 OUTER RING |
| MATERIAL | STEEL COMP XC38 ALIGNMENT RING |
| MATERIAL | STEEL CORROSION RESISTING OUTSIDE WASHERS |
| INNER RING WIDTH | 20.0 MILLIMETERS NOMINAL |
| OUTER RING OUTSIDE DIAMETER | 60.95 MILLIMETERS MINIMUM AND 61.05 MILLIMETERS MAXIMUM |
| OUTER RING WIDTH | 10.0 MILLIMETERS NOMINAL |
| RIVET HOLE DIAMETER | 5.1 MILLIMETERS NOMINAL |
| RIVET HOLE QUANTITY | 6 |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT LOCATION | EXTERNAL |
| SPECIAL FEATURES | 4 TROUS A 90 DEG SUR BAGUE INTERIEURE DIAM 4.1MM A 5MM DE L'EXTREMITE DE LA BAGUE |
| STYLE DESIGNATOR | FLANGED SELF-ALIGNING RING, EXTENDED INNER RING |
| SURFACE TREATMENT | CADMIUM ALIGNMENT RING |