5905-00-877-5725 RESISTOR SUBASSEMBLY Index 5905-00-877-5728 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
3120-00-877-5726

Federal Supply Class:
3120

National Item Identification Number:
008775726

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
02-1163099167HAMILTON SUNDSTRAND CORPORATION


Techincal Specification:
DIAMETER0.6510 INCHES MINIMUM AND 0.6610 INCHES MAXIMUM
CENTER HOLE SHAPE STYLEROUND
CORNER SHAPESQUARE FIRST INSIDE CORNER
CORNER SHAPESQUARE FIRST OUTSIDE CORNER
CORNER SHAPESQUARE FOURTH OUTSIDE CORNER
CORNER SHAPESQUARE SECOND INSIDE CORNER
CORNER SHAPESQUARE SECOND OUTSIDE CORNER
CORNER SHAPESQUARE THIRD OUTSIDE CORNER
CROSS-SECTIONAL SHAPE STYLESHOULDERED
FLANGE THICKNESS0.0890 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM
KEYWAY QUANTITY1
KEYWAY RADIUS0.0495 INCHES MINIMUM AND 0.0505 INCHES MAXIMUM
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE DIAMETER1.2470 INCHES MINIMUM AND 1.2480 INCHES MAXIMUM
OVERALL THICKNESS0.1200 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
SHANK OUTSIDE DIAMETER0.8230 INCHES MINIMUM AND 0.8330 INCHES MAXIMUM
SPECIAL FEATURES1 GROOVE 0.016 IN. WIDE 0.016 IN. DEEP LOCATED ON FACE OF FLANGE OD
WASHER KEYWAY DEPTH0.1315 INCHES MINIMUM AND 0.1615 INCHES MAXIMUM
STYLE DESIGNATORROUND W/KEYWAYS


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us