| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | ANY ACCEPTABLE |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CHROMATE AND COMPLETE FITTING ZINC 1ST END |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CHROMATE AND COMPLETE FITTING ZINC 2ND END |
| FLOW ANGLE | 90,0 DEGREES 2ND END |
| INSIDE SURFACE CONDITION | SMOOTH |
| INSIDE DIAMETER | 9,5 MILLIMETERS NOMINAL |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL 2ND END |
| BURST TEST PRESSURE | 1320,0 BAR |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| HYDROSTATIC TEST PRESSURE | 795,0 BAR |
| MAXIMUM OPERATING PRESSURE | 530,0 BAR |
| MEASURING METHOD AND LENGTH | 1,45 METERS NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 130,0 MILLIMETERS |
| NOMINAL THREAD SIZE | 18,0 MILLIMETERS 1ST END |
| NOMINAL THREAD SIZE | 18,0 MILLIMETERS 2ND END |
| OUTSIDE DIAMETER | 19,0 MILLIMETERS NOMINAL |
| TEMP RATING | -40,0 DEG CELSIUS AND 125,0 DEG CELSIUS |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | ISO METRIC FINE 1ST END |
| THREAD SERIES DESIGNATOR | ISO METRIC FINE 2ND END |
| THREAD PITCH IN MILLIMETERS | 1,5 1ST END |
| THREAD PITCH IN MILLIMETERS | 1,5 2ND END |