| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL 2ND END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BURST TEST PRESSURE | 1000,0 BAR |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | NUT ASSEMBLY WITH INVERTED FLARE AND GASKET 1ST END |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | ANY ACCEPTABLE |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CHROMATE AND COMPLETE FITTING ZINC 1ST END |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CHROMATE AND COMPLETE FITTING ZINC 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FLOW ANGLE | 45,0 DEGREES 2ND END |
| INSIDE DIAMETER | 15,9 MILLIMETERS NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| HYDROSTATIC TEST PRESSURE | 600,0 BAR |
| MAXIMUM OPERATING PRESSURE | 400,0 BAR |
| MEASURING METHOD AND LENGTH | 725,0 MILLIMETERS NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 200,0 MILLIMETERS |
| NOMINAL THREAD SIZE | 30,0 MILLIMETERS 1ST END |
| OUTSIDE DIAMETER | 25,4 MILLIMETERS NOMINAL |
| TEMP RATING | -40,0 DEG CELSIUS AND 125,0 DEG CELSIUS |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | ISO METRIC FINE 1ST END |
| THREAD PITCH IN MILLIMETERS | 2,0 1ST END |