|
|
|
National Stock Number:
4730-12-131-7930
Federal Supply Class:
4730
National Item Identification Number:
121317930
Description:
BOLT,FLUID PASSAGE
Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 700223010000 | 3B518 | DETROIT DIESEL CORPORATION | | 700223010000 | D8266 | MTU FRIEDRICHSHAFEN GMBH | | A10MMN223 | D8266 | MTU FRIEDRICHSHAFEN GMBH | | M0102049 | 0141B | NAVANTIA, S.A., S.M.E. | | MMN223-A12-ST | D8266 | MTU FRIEDRICHSHAFEN GMBH |
|
Techincal Specification:
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 24,3 MILLIMETERS NOMINAL | | DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT | 18,3 MILLIMETERS NOMINAL | | CONCENTRIC HOLE DEPTH | 30,0 MILLIMETERS NOMINAL | | CONCENTRIC HOLE DIAMETER | 11,0 MILLIMETERS NOMINAL | | FIRST DIAMETER FROM WRENCHING FEATURE | 18,0 MILLIMETERS NOMINAL | | FIRST END THREAD PITCH IN MILLIMETERS | 1,5 | | FIRST END THREAD TOLERANCE CLASS | 6G EXTERNAL | | FIRST RADIAL FLUID HOLE DIAMETER | 5,5 MILLIMETERS NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 17,5 MILLIMETERS NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 32,0 MILLIMETERS NOMINAL | | III MATERIAL | STEEL | | III SUPPLEMENTARY FEATURES | ART DES SCHRAUBENENDES:MIT GEWINDE; LAENGE DES GEWINDES AM ENDE:12,5 MILLIMETER NENNWERT; ORT DES GEWINDES AM ENDE:AUSZEN | | OVERALL LENGTH | 40,0 MILLIMETERS NOMINAL | | SECOND END THREAD DIRECTION | RIGHT-HAND | | SECOND END THREAD SERIES DESIGNATOR | ISO METRIC FINE | | SECOND RADIAL FLUID HOLE DIAMETER | 5,5 MILLIMETERS NOMINAL | | WIDTH ACROSS FLATS | 24,0 MILLIMETERS NOMINAL | | WRENCHING FEATURE HEIGHT | 8,0 MILLIMETERS NOMINAL | | WRENCHING FEATURE STYLE | HEXAGON | | TEST DATA DOCUMENT | D8266-A10MMN223ST DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|