4810-01-017-3997, VALVE,SOLENOID

National Stock Number:
4810-01-017-3997

Federal Supply Class:
4810

National Item Identification Number:
010173997

Description:
VALVE,SOLENOID

Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.

Manufacturer Information:

692545-3

99193

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

CONNECTION STYLE	FLARE(TUBE) ALL ENDS
CONNECTION TYPE	THREADED INTERNAL TUBE ALL ENDS
CURRENT RATING IN AMPS	1.000
FLOW CONTROL DEVICE NORMAL OPERATION POSITION	CLOSED
FLOW CONTROL DEVICE	POPPET
INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL	300.0 POUNDS PER SQUARE INCH NOMINAL
MATERIAL	STEEL CORROSION RESISTING BODY
MATERIAL	STEEL CORROSION RESISTING FLOW CONTROL DEVICE
MAXIMUM OPERATING PRESSURE	1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP	180.0 FAHRENHEIT SINGLE RESPONSE
MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON SINGLE RESPONSE
MOUNTING POSITION	HORIZONTAL
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED	0.250 INCHES ALL ENDS
NOMINAL THREAD SIZE	0.438 INCHES ALL ENDS
SEAT ANGLE	45.0 DEGREES ALL ENDS
SPECIAL FEATURES	W/TWO MTG HOLES 0.219 IN. DIA
STYLE DESIGNATOR	STRAIGHT THRU
THREAD CLASS	3B ALL ENDS
THREAD DIRECTION	RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
VALVE OPERATION METHOD	SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE	28.0 DC

Click here to Register for Free 30-day Trial