5305-00-823-5902, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-823-5902

Federal Supply Class:
5305

National Item Identification Number:
008235902

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

D66-2011-122	34855	LANDERS FRARY AND CLARK
SMB319724	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	1.570 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.325 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.150 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.940 INCHES MINIMUM AND 1.950 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
HEAD DIAMETER	0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HEAD HEIGHT	0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 1
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 1212 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES
SECOND DIAMETER FROM HEAD	0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THIRD DIAMETER FROM HEAD	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial