|
|
|
National Stock Number:
5305-01-116-6610
Federal Supply Class:
5305
National Item Identification Number:
011166610
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 450-SS-20 | 55566 | MATTHEW WARREN, INC |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.594 INCHES NOMINAL | | EXTERNAL THREAD TOLERANCE CLASS | 2A | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 3 | | FASTENER LENGTH | 1.000 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.130 INCHES NOMINAL | | HEAD DIAMETER | 0.375 INCHES NOMINAL | | HEAD HEIGHT | 0.437 INCHES NOMINAL | | HEAD STYLE | KNURLED NO. 4 | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SECOND DIAMETER FROM HEAD | 0.190 INCHES NOMINAL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THIRD DIAMETER FROM HEAD | 0.130 INCHES NOMINAL | | THREAD LENGTH | 0.250 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|