5305-01-162-8533, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-162-8533

Federal Supply Class:
5305

National Item Identification Number:
011628533

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

SS5105-417	78286	SIKORSKY AIRCRAFT CORPORATION
SS5105-417	84256	AVIBANK MFG., INC.

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.395 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	1.481 INCHES MINIMUM AND 1.501 INCHES MAXIMUM
GRIP DIAMETER	0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH	1.062 INCHES MINIMUM AND 1.078 INCHES MAXIMUM
HEAD DIAMETER	0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	HIGH-TORQUE
LOCKING FEATURE	DETENT BALL GRIP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH	53000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.403 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial