|
|
|
National Stock Number:
5305-14-412-8998
Federal Supply Class:
5305
National Item Identification Number:
144128998
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
(ALL EXCEPT USA) A HEADED EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION MAY EXTEND ON PART OR WHOLE OF ITS SHANK. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH A TOOL. THE THREADED PORTION IS CYLINDRICAL AND ITS DIAMETER 1.6 MM OR MORE. FOR ITEMS WITH DIAMETERS BELOW 1.6 MM SEE SCREW, INSTRUMENT. THE ITEM IS DESIGNED TO BE DRIVEN IN A PREEXISTING MATING SCREWTHREAD OR TO ACCOMMODATE A NUT, INSURING ASSEMBLING OF PARTS, WITH THE PART OPPOSITE THE HEAD ACTING AS A NUT, OR INSURING A GRIP BETWEEN THE BEARING SURFACE OF ITS HEAD AND THAT OF A NUT SCREWED ON ITS END. THE THREADED END MAY HAVE A PILOT FOR EASIER DRIVING INTO A DRILLED HOLE. IF THE POINT IS DESIGNED TO PREVENT OR RESTRICT RELATIVE MOVEMENTS OF PARTS SEE SETSCREW. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. IF THE ITEM IS FURNISHED WITH ATTACHMENTS SUCH AS NUT(S), WASHER(S), PIN(S), AND THE LIKE, SEE SCREW ASSEMBLY OR BOLT (AS MODIFIED).
|
Manufacturer Information:
| 22129BE100124L | F0111 | BUREAU NORMALISATION AERONAUTIQUEESPACE | | 22129BE100124L | F0188 | BLANC AERO INDUSTRIES - GROUPE LISIAEROSPACE | | 22129BE100124L | F0236 | SAINT CHAMOND GRANAT SA | | 22129BE100124L | F0434 | ALIGN AEROSPACE FRANCE SAS | | L22129-100-124BEL | F0111 | BUREAU NORMALISATION AERONAUTIQUEESPACE |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 120.0 MILLIMETERS NOMINAL FIRST HOLE | | EXTERNAL THREAD TOLERANCE CLASS | 4H | | FASTENER LENGTH | 124.0 MILLIMETERS NOMINAL | | HEAD HEIGHT | 5.0 MILLIMETERS NOMINAL | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | F3025 AIR 9160C MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 30NCD16 OVERALL | | MINIMUM TENSILE STRENGTH | 1080 MEGAPASCALS | | MINIMUM YIELD STRENGTH | 880 MEGAPASCALS | | NOMINAL THREAD DIAMETER | 10.0 MILLIMETERS | | SHANK UNTHREADED HOLE DIAMETER | 2.5 MILLIMETERS NOMINAL FIRST HOLE | | WIDTH BETWEEN FLATS | 17.0 MILLIMETERS NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NF L 09-753 CODE L NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 11.0 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | ISO M | | THREAD PITCH IN MILLIMETERS | 1.5 |
|
|