|
|
|
National Stock Number:
5305-14-420-2270
Federal Supply Class:
5305
National Item Identification Number:
144202270
Description:
SCREW
Detail:
(ALL EXCEPT USA) A HEADED EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION MAY EXTEND ON PART OR WHOLE OF ITS SHANK. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH A TOOL. THE THREADED PORTION IS CYLINDRICAL AND ITS DIAMETER 1.6 MM OR MORE. FOR ITEMS WITH DIAMETERS BELOW 1.6 MM SEE SCREW, INSTRUMENT. THE ITEM IS DESIGNED TO BE DRIVEN IN A PREEXISTING MATING SCREWTHREAD OR TO ACCOMMODATE A NUT, INSURING ASSEMBLING OF PARTS, WITH THE PART OPPOSITE THE HEAD ACTING AS A NUT, OR INSURING A GRIP BETWEEN THE BEARING SURFACE OF ITS HEAD AND THAT OF A NUT SCREWED ON ITS END. THE THREADED END MAY HAVE A PILOT FOR EASIER DRIVING INTO A DRILLED HOLE. IF THE POINT IS DESIGNED TO PREVENT OR RESTRICT RELATIVE MOVEMENTS OF PARTS SEE SETSCREW. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. IF THE ITEM IS FURNISHED WITH ATTACHMENTS SUCH AS NUT(S), WASHER(S), PIN(S), AND THE LIKE, SEE SCREW ASSEMBLY OR BOLT (AS MODIFIED).
|
Manufacturer Information:
| BHM1AG030015UL | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | BHM1QG030015UL | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E27113B30M15AGUL | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E27113B30M15QGUL | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION |
|
Techincal Specification:
| DEPARTURE FROM CITED DOCUMENT | MODIFIE PAR LONGUEUR | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL | | EXTERNAL THREAD TOLERANCE CLASS | 4H | | FASTENER LENGTH | 15.0 MILLIMETERS NOMINAL | | HEAD DIAMETER | 5.3 MILLIMETERS MINIMUM AND 6.3 MILLIMETERS MAXIMUM | | MATERIAL | STEEL | | NOMINAL THREAD DIAMETER | 3.0 MILLIMETERS | | STRENGTH GRADE DESIGNATION | 6.6 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MA-E25-27 CODE L MIL SPEC SINGLE TREATMENT RESPONSE | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | ISO M | | THREAD PITCH IN MILLIMETERS | 0.5 |
|
|