|
|
|
National Stock Number:
5305-14-425-3152
Federal Supply Class:
5305
National Item Identification Number:
144253152
Description:
SCREW,MACHINE
Detail:
(ALL EXCEPT USA) A HEADED EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION MAY EXTEND ON PART OR WHOLE OF ITS SHANK. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH A TOOL. THE THREADED PORTION IS CYLINDRICAL AND ITS DIAMETER 1.6 MM OR MORE. FOR ITEMS WITH DIAMETERS BELOW 1.6 MM SEE SCREW, INSTRUMENT. THE ITEM IS DESIGNED TO BE DRIVEN IN A PREEXISTING MATING SCREWTHREAD OR TO ACCOMMODATE A NUT, INSURING ASSEMBLING OF PARTS, WITH THE PART OPPOSITE THE HEAD ACTING AS A NUT, OR INSURING A GRIP BETWEEN THE BEARING SURFACE OF ITS HEAD AND THAT OF A NUT SCREWED ON ITS END. THE THREADED END MAY HAVE A PILOT FOR EASIER DRIVING INTO A DRILLED HOLE. IF THE POINT IS DESIGNED TO PREVENT OR RESTRICT RELATIVE MOVEMENTS OF PARTS SEE SETSCREW. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. IF THE ITEM IS FURNISHED WITH ATTACHMENTS SUCH AS NUT(S), WASHER(S), PIN(S), AND THE LIKE, SEE SCREW ASSEMBLY OR BOLT (AS MODIFIED).
|
Manufacturer Information:
| 99140501 | F6481 | THALES SA | | E25137A30Q10ZHA | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E25137A30Q10ZHAPA | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E25137A30Q10ZHAPA | F1236 | PREAULT TECHNOLOGIES | | E25137A30Q10ZHAPA | F4796 | ETABLISSEMENTS BD | | E25137A30Q10ZHAPA | F6072 | UGIVIS | | E25137A30Q10ZHAPA | F9615 | CASEUROP | | N9Q1ZH030010APA | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | V310310J | F0296 | SAFRAN ELECTRICAL & POWER CHATOU SAS | | VIS HS,M3X10/10 A4-70 PAS E25137 | F6481 | THALES SA |
|
Techincal Specification:
| EXTERNAL THREAD TOLERANCE CLASS | 6G | | FASTENER LENGTH | 10.0 MILLIMETERS NOMINAL | | HEAD HEIGHT | 1.88 MILLIMETERS MINIMUM AND 2.12 MILLIMETERS MAXIMUM | | HEAD STYLE | HEXAGON | | INTERNAL DRIVE STYLE | SLOT | | MINIMUM TENSILE STRENGTH | 700 MEGAPASCALS | | NOMINAL THREAD DIAMETER | 3.0 MILLIMETERS | | SCREW MATERIAL | STEEL | | SCREW SURFACE TREATMENT | PASSIVATE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MA-E25-27 CODE PA MIL SPEC SINGLE TREATMENT RESPONSE | | WIDTH BETWEEN FLATS | 5.32 MILLIMETERS MINIMUM AND 5.50 MILLIMETERS MAXIMUM | | TEST DATA DOCUMENT | F0110-E25-100 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 10.0 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | ISO M | | THREAD PITCH IN MILLIMETERS | 0.5 |
|
|