|
|
|
National Stock Number:
5305-14-431-1861
Federal Supply Class:
5305
National Item Identification Number:
144311861
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
(ALL EXCEPT USA) A HEADED EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION MAY EXTEND ON PART OR WHOLE OF ITS SHANK. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH A TOOL. THE THREADED PORTION IS CYLINDRICAL AND ITS DIAMETER 1.6 MM OR MORE. FOR ITEMS WITH DIAMETERS BELOW 1.6 MM SEE SCREW, INSTRUMENT. THE ITEM IS DESIGNED TO BE DRIVEN IN A PREEXISTING MATING SCREWTHREAD OR TO ACCOMMODATE A NUT, INSURING ASSEMBLING OF PARTS, WITH THE PART OPPOSITE THE HEAD ACTING AS A NUT, OR INSURING A GRIP BETWEEN THE BEARING SURFACE OF ITS HEAD AND THAT OF A NUT SCREWED ON ITS END. THE THREADED END MAY HAVE A PILOT FOR EASIER DRIVING INTO A DRILLED HOLE. IF THE POINT IS DESIGNED TO PREVENT OR RESTRICT RELATIVE MOVEMENTS OF PARTS SEE SETSCREW. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. IF THE ITEM IS FURNISHED WITH ATTACHMENTS SUCH AS NUT(S), WASHER(S), PIN(S), AND THE LIKE, SEE SCREW ASSEMBLY OR BOLT (AS MODIFIED).
|
Manufacturer Information:
| 0010481 | S3002 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH | | 75502062 | F6869 | AXLETECH INTERNATIONAL SAS | | E25114B100Q30QKA | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | EN24017-M10X30-10.9 | I9006 | COMITE EUROPEEN DE NORMALISATION | | ISO4017-M10X30-10.9 | I9008 | INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) |
|
Techincal Specification:
| EXTERNAL THREAD TOLERANCE CLASS | 6G | | FASTENER LENGTH | 30.0 MILLIMETERS NOMINAL | | HARDNESS RATING | 31.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 6.4 MILLIMETERS NOMINAL | | HEAD STYLE | HEXAGON | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 1040 MEGAPASCALS | | NOMINAL THREAD DIAMETER | 10.0 MILLIMETERS | | WIDTH BETWEEN FLATS | 15.73 MILLIMETERS MINIMUM AND 16.00 MILLIMETERS MAXIMUM | | TEST DATA DOCUMENT | F0110 E25-100 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 30.0 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | ISO M | | THREAD PITCH IN MILLIMETERS | 1.5 |
|
|