|
|
|
National Stock Number:
5305-14-433-5859
Federal Supply Class:
5305
National Item Identification Number:
144335859
Description:
SCREW,MACHINE
Detail:
(ALL EXCEPT USA) A HEADED EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION MAY EXTEND ON PART OR WHOLE OF ITS SHANK. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH A TOOL. THE THREADED PORTION IS CYLINDRICAL AND ITS DIAMETER 1.6 MM OR MORE. FOR ITEMS WITH DIAMETERS BELOW 1.6 MM SEE SCREW, INSTRUMENT. THE ITEM IS DESIGNED TO BE DRIVEN IN A PREEXISTING MATING SCREWTHREAD OR TO ACCOMMODATE A NUT, INSURING ASSEMBLING OF PARTS, WITH THE PART OPPOSITE THE HEAD ACTING AS A NUT, OR INSURING A GRIP BETWEEN THE BEARING SURFACE OF ITS HEAD AND THAT OF A NUT SCREWED ON ITS END. THE THREADED END MAY HAVE A PILOT FOR EASIER DRIVING INTO A DRILLED HOLE. IF THE POINT IS DESIGNED TO PREVENT OR RESTRICT RELATIVE MOVEMENTS OF PARTS SEE SETSCREW. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. IF THE ITEM IS FURNISHED WITH ATTACHMENTS SUCH AS NUT(S), WASHER(S), PIN(S), AND THE LIKE, SEE SCREW ASSEMBLY OR BOLT (AS MODIFIED).
|
Manufacturer Information:
| 1027746X00 | F0555 | MBDA FRANCE | | 2146281899 | F9111 | THALES AVS FRANCE SAS | | 99140306 | 94404 | RAYTHEON COMPANY | | B8Q1ZH030012APA | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | 99140306 | F6481 | THALES SA | | A1235934 | F9111 | THALES AVS FRANCE SAS | | E25123B30Q12ZHAPA | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E25123B30Q12ZHAPA | F1236 | PREAULT TECHNOLOGIES | | E25123B30Q12ZHAPA | F4106 | FRAPINOX STE FRANCAISE DES PRODUITS EN ACIER INOX SA | | E25123B30Q12ZHAPA | F6072 | UGIVIS | | E25123B30Q12ZHAPA | F9615 | CASEUROP | | E25123B30Q12ZHAPA | F9667 | SAS SATINOX ASSEMBLAGE | | ENISO2009-M3X12-A4-70 | I9006 | COMITE EUROPEEN DE NORMALISATION | | ISO2009-M3X12-A4-70 | I9008 | INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) | | VIS FS,M3X12/12 A4-70 PAS E25123 | F6481 | THALES SA |
|
Techincal Specification:
| COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL | | EXTERNAL THREAD TOLERANCE CLASS | 6G | | FASTENER LENGTH | 12.0 MILLIMETERS NOMINAL | | HEAD DIAMETER | 5.2 MILLIMETERS MINIMUM AND 5.5 MILLIMETERS MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | SLOT | | NOMINAL THREAD DIAMETER | 3.0 MILLIMETERS | | SCREW MATERIAL | STEEL | | SCREW SURFACE TREATMENT | PASSIVATE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MA-E25-27 CODE PA MIL SPEC SINGLE TREATMENT RESPONSE | | TEST DATA DOCUMENT | F0110-E25-100 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 10.35 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | ISO M | | THREAD PITCH IN MILLIMETERS | 0.5 |
|
|