|
|
|
National Stock Number:
5305-14-448-6023
Federal Supply Class:
5305
National Item Identification Number:
144486023
Description:
SCREW,MACHINE
Detail:
(ALL EXCEPT USA) A HEADED EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION MAY EXTEND ON PART OR WHOLE OF ITS SHANK. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH A TOOL. THE THREADED PORTION IS CYLINDRICAL AND ITS DIAMETER 1.6 MM OR MORE. FOR ITEMS WITH DIAMETERS BELOW 1.6 MM SEE SCREW, INSTRUMENT. THE ITEM IS DESIGNED TO BE DRIVEN IN A PREEXISTING MATING SCREWTHREAD OR TO ACCOMMODATE A NUT, INSURING ASSEMBLING OF PARTS, WITH THE PART OPPOSITE THE HEAD ACTING AS A NUT, OR INSURING A GRIP BETWEEN THE BEARING SURFACE OF ITS HEAD AND THAT OF A NUT SCREWED ON ITS END. THE THREADED END MAY HAVE A PILOT FOR EASIER DRIVING INTO A DRILLED HOLE. IF THE POINT IS DESIGNED TO PREVENT OR RESTRICT RELATIVE MOVEMENTS OF PARTS SEE SETSCREW. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. IF THE ITEM IS FURNISHED WITH ATTACHMENTS SUCH AS NUT(S), WASHER(S), PIN(S), AND THE LIKE, SEE SCREW ASSEMBLY OR BOLT (AS MODIFIED).
|
Manufacturer Information:
| BHQ1AG025012ULG | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | BHQ1QG025012ULG | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E27113B25Q12AGULG | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E27113B25Q12QGULG | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION |
|
Techincal Specification:
| COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL | | EXTERNAL THREAD TOLERANCE CLASS | 4H | | FASTENER LENGTH | 12.0 MILLIMETERS NOMINAL | | HEAD DIAMETER | 4.4 MILLIMETERS MINIMUM AND 5.5 MILLIMETERS MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | SLOT | | NOMINAL THREAD DIAMETER | 2.5 MILLIMETERS | | SCREW MATERIAL | STEEL | | SCREW SURFACE TREATMENT | ZINC AND CHROMATE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MA-E25-27 CODE LG MIL SPEC SINGLE TREATMENT RESPONSE | | TEST DATA DOCUMENT | F0110-E27-005 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 12.0 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | ISO M | | THREAD PITCH IN MILLIMETERS | 0.45 |
|
|