|
|
|
National Stock Number:
5305-14-504-4676
Federal Supply Class:
5305
National Item Identification Number:
145044676
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
(ALL EXCEPT USA) A HEADED EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION MAY EXTEND ON PART OR WHOLE OF ITS SHANK. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH A TOOL. THE THREADED PORTION IS CYLINDRICAL AND ITS DIAMETER 1.6 MM OR MORE. FOR ITEMS WITH DIAMETERS BELOW 1.6 MM SEE SCREW, INSTRUMENT. THE ITEM IS DESIGNED TO BE DRIVEN IN A PREEXISTING MATING SCREWTHREAD OR TO ACCOMMODATE A NUT, INSURING ASSEMBLING OF PARTS, WITH THE PART OPPOSITE THE HEAD ACTING AS A NUT, OR INSURING A GRIP BETWEEN THE BEARING SURFACE OF ITS HEAD AND THAT OF A NUT SCREWED ON ITS END. THE THREADED END MAY HAVE A PILOT FOR EASIER DRIVING INTO A DRILLED HOLE. IF THE POINT IS DESIGNED TO PREVENT OR RESTRICT RELATIVE MOVEMENTS OF PARTS SEE SETSCREW. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. IF THE ITEM IS FURNISHED WITH ATTACHMENTS SUCH AS NUT(S), WASHER(S), PIN(S), AND THE LIKE, SEE SCREW ASSEMBLY OR BOLT (AS MODIFIED).
|
Manufacturer Information:
| 0HEI1020S2E | F5448 | CEFA | | 210101-10X20 | FAHB8 | BENE INOX | | 5305MT0204645 | FB5C0 | ELOCA ROANNE | | DIN933-M10X20-A2-70 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | E25114B100Q20ZEA | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | E25114B100Q20ZEA | F1236 | PREAULT TECHNOLOGIES | | E25114B100Q20ZEAPA | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION | | EN24017-M10X20-A2-70 | I9006 | COMITE EUROPEEN DE NORMALISATION | | ENISO4017-M10X20-A2-70 | I9006 | COMITE EUROPEEN DE NORMALISATION | | HA1101A00 | F6371 | INEO DEFENSE SOPHIA ANTIPOLISVALBONNE | | ISO4017-M10X20-A2-70 | I9008 | INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) | | VYQ1ZE100020A | F0110 | AFNOR ASSOCIATION FRANCAISE DE NORMALISATION |
|
Techincal Specification:
| EXTERNAL THREAD TOLERANCE CLASS | 6G | | FASTENER LENGTH | 20.0 MILLIMETERS NOMINAL | | HEAD HEIGHT | 6.4 MILLIMETERS NOMINAL | | HEAD STYLE | HEXAGON | | MATERIAL | STEEL COMP A2 OVERALL | | NOMINAL THREAD DIAMETER | 10.0 MILLIMETERS | | WIDTH BETWEEN FLATS | 15.73 MILLIMETERS MINIMUM AND 16.00 MILLIMETERS MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEST DATA DOCUMENT | I9008-ISO 3506-1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 20.0 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | ISO M | | THREAD PITCH IN MILLIMETERS | 1.5 |
|
|