|
|
|
National Stock Number:
5306-01-167-2404
Federal Supply Class:
5306
National Item Identification Number:
011672404
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 121491-16-48 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| FASTENER LENGTH | 4.208 INCHES MINIMUM AND 4.244 INCHES MAXIMUM | | GRIP DIAMETER | 0.9982 INCHES MINIMUM AND 0.9991 INCHES MAXIMUM | | GRIP LENGTH | 2.976 INCHES MINIMUM AND 2.992 INCHES MAXIMUM | | HEAD HEIGHT | 0.501 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MINIMUM TENSILE STRENGTH | 74000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 1.000 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.885 INCHES MINIMUM AND 1.196 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 12 | | WIDTH BETWEEN FLATS | 1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM |
|
|