5306-01-228-6799, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-01-228-6799

Federal Supply Class:
5306

National Item Identification Number:
012286799

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

106467-8-17	80539	SPS TECHNOLOGIES, LLC
MS27576-8-17	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS27576-8-17	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

THREAD SERIES DESIGNATOR	UNJF
NOMINAL THREAD DIAMETER	0.500 INCHES
THREAD QUANTITY PER INCH	20
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.646 INCHES MINIMUM AND
	0.650 INCHES MAXIMUM
FASTENER LENGTH	1.708 INCHES MINIMUM AND
	1.728 INCHES MAXIMUM
MATERIAL	STEEL COMP E4340 OR
	STEEL COMP 4140 OR
	STEEL COMP 8740 OR
	STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR
	MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR
	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND
	36.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	95000 POUNDS PER SQUARE INCH
HEAD STYLE	DISHED HEXAGON
HEAD HEIGHT	0.251 INCHES MINIMUM AND
	0.266 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.840 INCHES MINIMUM
GRIP LENGTH	1.062 INCHES MINIMUM AND
	1.078 INCHES MAXIMUM
GRIP DIAMETER	0.4982 INCHES MINIMUM AND
	0.4991 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
	63.0 MICROINCHES GRIP
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.598 INCHES MINIMUM AND
	1.608 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND
	0.116 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	RETAINING ELEMENT IN SHANK
SPECIFICATION/STANDARD DATA	96906-MS27576-8-17 GOVERNMENT STANDARD

Click here to Register for Free 30-day Trial