|
|
|
National Stock Number:
5306-14-360-4191
Federal Supply Class:
5306
National Item Identification Number:
143604191
Description:
PIN,HEADED,THREADED
Detail:
(ALL EXCEPT USA) A CONNECTING AND/OR ARTICULATING DEVICE HAVING A CYLINDRICAL SHANK WITH A HEAD AT ONE END AND A THREADED PORTION AT THE OTHER END. THE UNTHREADED PORTION IS OF A SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (25 MICRONS) OR LESS, OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25.4 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25.4 MM) IN DIAMETER, SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (38 MICRONS) OR LESS. THE SPECIFIC RMS NICROINCH FINISH ON THE BEARING SURFACE MUST NOT EXCEED 32 MICROINCHES (0.8 MICRON). THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (25 MICRONS) BELOW THE MINIMUM SHANK DIAMETER. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER AND/OR MAY HAVE FLATS OR SIMILAR FEATURES FOR POSITIONING OR SECURING. THE ITEM MAY BE INTERNALLY RELIEVED WITH A CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE WHICH MAY EXTEND A PART OR WHOLE OF ITS LENGTH. EXCLUDES BOLT, CLOSE TOLERANCE; BOLT, SHEAR; BOLT, SHOULDER; AND BOLT, INTERNALLY RELIEVED BODY.
|
Manufacturer Information:
| 39441BC060012M | F6117 | DASSAULT AVIATION |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 18.3 MILLIMETERS MINIMUM AND 18.5 MILLIMETERS MAXIMUM | | FASTENER LENGTH | 21.5 MILLIMETERS MINIMUM AND 22.1 MILLIMETERS MAXIMUM | | GRIP DIAMETER | 5.99 MILLIMETERS MINIMUM AND 6.00 MILLIMETERS MAXIMUM | | GRIP LENGTH | 11.7 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM | | HEAD HEIGHT | 2.25 MILLIMETERS MINIMUM AND 2.50 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | F3025 MIL STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 35NC6 | | MINIMUM TENSILE STRENGTH | 880 MEGAPASCALS | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 1.778 MILLIMETERS MINIMUM AND 2.032 MILLIMETERS MAXIMUM | | WIDTH BETWEEN FLATS | 9.271 MILLIMETERS MINIMUM AND 9.576 MILLIMETERS MAXIMUM | | SURFACE FINISH | 0.8 MICROMETERS | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|