|
|
|
National Stock Number:
5306-14-369-3536
Federal Supply Class:
5306
National Item Identification Number:
143693536
Description:
PIN,HEADED,THREADED
Detail:
(ALL EXCEPT USA) A CONNECTING AND/OR ARTICULATING DEVICE HAVING A CYLINDRICAL SHANK WITH A HEAD AT ONE END AND A THREADED PORTION AT THE OTHER END. THE UNTHREADED PORTION IS OF A SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (25 MICRONS) OR LESS, OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25.4 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25.4 MM) IN DIAMETER, SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (38 MICRONS) OR LESS. THE SPECIFIC RMS NICROINCH FINISH ON THE BEARING SURFACE MUST NOT EXCEED 32 MICROINCHES (0.8 MICRON). THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (25 MICRONS) BELOW THE MINIMUM SHANK DIAMETER. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER AND/OR MAY HAVE FLATS OR SIMILAR FEATURES FOR POSITIONING OR SECURING. THE ITEM MAY BE INTERNALLY RELIEVED WITH A CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE WHICH MAY EXTEND A PART OR WHOLE OF ITS LENGTH. EXCLUDES BOLT, CLOSE TOLERANCE; BOLT, SHEAR; BOLT, SHOULDER; AND BOLT, INTERNALLY RELIEVED BODY.
|
Manufacturer Information:
| 39445-60X29BEM | F6117 | DASSAULT AVIATION | | 39445BE060029M | F6117 | DASSAULT AVIATION |
|
Techincal Specification:
| CABLE DIAMETER | 9.8 MILLIMETERS NOMINAL | | FASTENER LENGTH | 38.5 MILLIMETERS MINIMUM AND 39.1 MILLIMETERS MAXIMUM | | GRIP DIAMETER | 5.982 MILLIMETERS MINIMUM AND 5.990 MILLIMETERS MAXIMUM | | GRIP LENGTH | 28.7 MILLIMETERS MINIMUM AND 29.0 MILLIMETERS MAXIMUM | | HEAD HEIGHT | 2.25 MILLIMETERS MINIMUM AND 2.50 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | F3025 AIR 9160C MIL STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 30NCD16 | | MINIMUM TENSILE STRENGTH | 1080 MEGAPASCALS | | MINIMUM YIELD STRENGTH | 880 MEGAPASCALS | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | WIDTH BETWEEN FLATS | 9.271 MILLIMETERS MINIMUM OR 9.576 MILLIMETERS MAXIMUM | | SURFACE FINISH | 0.8 MICROMETERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NF L 09-753 CODE M NATIONAL SPEC SINGLE TREATMENT RESPONSE | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|