|
|
|
National Stock Number:
5307-12-151-9159
Federal Supply Class:
5307
National Item Identification Number:
121519159
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| (241)D8265001 459 | D8265 | SAUER, J.P. & SOHN MASCHINENBAU GMB | | 001459 | D8265 | SAUER, J.P. & SOHN MASCHINENBAU GMB | | 050040 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 050940 | D8931 | SIEMENS GEARED MOTORS GMBH | | 241 D8265001 45 | D8265 | SAUER, J.P. & SOHN MASCHINENBAU GMB | | DIN939-M6X20-8.8 | 0141B | NAVANTIA, S.A., S.M.E. | | DIN939-M6X20-8.8 | 409BB | NAVANTIA - PROPULSION Y ENERGIAMOTORES - CARTAGENA | | DIN939-M6X20-8.8 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | M6X20DIN939-8-8 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | M6X20DIN939-8.8 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | M6X20DIN939-8G | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | PL EL-CA21 IT024 | D8931 | SIEMENS GEARED MOTORS GMBH |
|
Techincal Specification:
| HARDNESS RATING | 250 ROCKWELL C MINIMUM AND 320 ROCKWELL C MAXIMUM | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 6.0 MILLIMETERS STUD THREAD | | NOMINAL THREAD SIZE | 6.0 MILLIMETERS NUT THREAD | | OFFSET YIELD STRENGTH | 640 NEWTONS PER SQUARE MILLIMETER | | OVERALL LENGTH | 27.5 MILLIMETERS NOMINAL | | STRENGTH GRADE DESIGNATION | 8.8 | | TEST DATA DOCUMENT | D8286-DIN939 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 14.5 MILLIMETERS NOMINAL NUT THREAD | | THREAD LENGTH | 5.0 MILLIMETERS NOMINAL STUD THREAD | | THREAD SERIES DESIGNATOR | ISO M NUT THREAD | | THREAD SERIES DESIGNATOR | ISO M STUD THREAD | | THREAD PITCH DIAMETERS | +5.335/+5.406 MILLIMETERS STUD THREAD | | THREAD PITCH DIAMETERS | +5.212/+5.324 MILLIMETERS NUT THREAD | | THREAD PITCH IN MILLIMETERS | 1.0 NUT THREAD | | THREAD PITCH IN MILLIMETERS | 1.0 STUD THREAD | | THREAD TOLERANCE CLASS | 6 KLEIN G EXTERNAL NUT THREAD | | THREAD TOLERANCE CLASS | S KLEIN K6 EXTERNAL STUD THREAD |
|
|