|
|
|
National Stock Number:
5307-12-324-3280
Federal Supply Class:
5307
National Item Identification Number:
123243280
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 04260418350357 | CA829 | KLAUS FISCHER DREH- UND PRESSTECHNIKGMBH | | 2300002-181900.003 | C2311 | BUNDESAMT FUER AUSRUESTUNG, INFORMATIONSTECHNIK UND NUTZUNG DER BUNDESWEHR (BAAINBW) - BENUTZUNGSRECHTE AN TECHNISCHEN U | | 2300002-181900.003 | D9448 | RHEINMETALL LANDSYSTEME GMBH | | 2300002-181900.003 | DRMV1 | RHEINMETALL MAN MILITARY VEHICLES GMBH | | 9867236 | D1785 | HENSCHEL WEHRTECHNIK GMBH | | 9867236 | D9448 | RHEINMETALL LANDSYSTEME GMBH |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 4,5 MILLIMETERS NOMINAL | | COTTER PIN HOLE DIAMETER | 3,0 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN267TEIL11 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP A2 | | NOMINAL THREAD SIZE | 12,0 MILLIMETERS NUT THREAD | | NOMINAL THREAD SIZE | 12,0 MILLIMETERS STUD THREAD | | OVERALL LENGTH | 50,0 MILLIMETERS NOMINAL | | TEST DATA DOCUMENT | C2311-2300002-181900.003 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 28,8 MILLIMETERS NOMINAL NUT THREAD | | THREAD LENGTH | 15,0 MILLIMETERS NOMINAL STUD THREAD | | THREAD SERIES DESIGNATOR | ISO M NUT THREAD | | THREAD SERIES DESIGNATOR | ISO M STUD THREAD | | THREAD PITCH IN MILLIMETERS | 1,5 NUT THREAD | | THREAD PITCH IN MILLIMETERS | 1,5 STUD THREAD | | THREAD TOLERANCE CLASS | 6 KLEIN G EXTERNAL NUT THREAD | | THREAD TOLERANCE CLASS | S KLEIN K6 EXTERNAL STUD THREAD |
|
|