|
|
|
National Stock Number:
5310-01-485-8092
Federal Supply Class:
5310
National Item Identification Number:
014858092
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 122-6938615 PC 57 | 43689 | HUNTINGTON INGALLS INC | | 122-6938615 PC 57 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 90126A031 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1006 OR | | STEEL COMP 1015 OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SAEJ403,C1006 ASSN STD 1ST TREATMENT RESPONSE OR | | SAEJ403,C1015 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.812 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.051 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | HARDNESS RATING | 49.0 ROCKWELL B NOMINAL |
|
|