|
|
|
National Stock Number:
5310-12-144-3934
Federal Supply Class:
5310
National Item Identification Number:
121443934
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 0057071 | D8061 | CNH BAUMASCHINEN GMBH | | 0057071 | U4665 | TEREX UK LTD | | 007980012002 | D8046 | DAIMLER AG | | 01119615 | D8060 | IVECO MAGIRUS AG | | 06.16110-8108 | D3273 | MAN TRUCK & BUS AG | | 06161100108 | D3273 | MAN TRUCK & BUS AG | | 06161108108 | D3273 | MAN TRUCK & BUS AG | | 10271178 | S3715 | BOFORS AB | | 1277308 | S7023 | BOSSARD LTD FASTENERS | | 12DIN7980-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 12DIN7980A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 12DIN7980FEZN8CX | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 12DIN7980GALZN8C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 1307013 | D0460 | ATLAS GMBH | | 1307013 | K6769 | ATLAS CRANES UK LIMITED | | 18425 | U4494 | EKA LIMITED | | 18425 B | U4494 | EKA LIMITED | | 6-272-0117 | D0589 | BUCHER MUNICIPAL GMBH DBA GMBH BUCHER-SCHOERLING | | 664-056ZP | 94223 | SPAENAUR INC DBA SPAENAUR INC. | | 939275 | D9913 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS-BRIDGE SYSTEMS GMBH | | BN774-M12 | S7023 | BOSSARD LTD FASTENERS | | CSN021740.15-12 | 4600G | URAD PRO TECHNICKOU NORMALIZACI,METROLOGII A STATNI ZKUSEBNICTVI | | DIN7980-12-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN7980-12-FST-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | N5-31-12 | S3715 | BOFORS AB | | NO PRIMARY REF 12-144-3934 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M | | VHZ-12 | C3876 | ITW FASTENER PRODUCTS GMBH |
|
Techincal Specification:
| HARDNESS RATING | 44,0 ROCKWELL C MINIMUM AND 51,0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 12,2 MILLIMETERS MINIMUM AND 12,7 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17221 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL THICKNESS | 2,35 MILLIMETERS MINIMUM AND 2,65 MILLIMETERS MAXIMUM | | MATERIAL | STEEL | | OUTSIDE DIAMETER | 18,0 MILLIMETERS MAXIMUM | | SPECIFICATION/STANDARD DATA | D8286-DIN7980/OKT87/ PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267/9, SCHLUESSEL A3P ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE AND ZINC |
|
|