|
|
|
National Stock Number:
5310-12-148-0558
Federal Supply Class:
5310
National Item Identification Number:
121480558
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| DIN6798-J5,3-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN6798-J5,3-FST-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | EA01296 | F3015 | NAVAL GROUP SITE DE LORIENT | | J5,3DIN6798-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J5,3DIN6798GALZN8C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J5-3DIN6798A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J5-3DIN6798FEZN8CX | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | J5-3DIN6798GALZN8C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| HARDNESS RATING | 350,0 VICKERS OR FIRTH DIAMOND PYRAMID MINIMUM AND 425,0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM | | HOLE DIAMETER | 5,30 MILLIMETERS MINIMUM AND 5,48 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17222 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL THICKNESS | 0,6 MILLIMETERS NOMINAL | | MATERIAL | STEEL | | OUTSIDE DIAMETER | 9,64 MILLIMETERS MINIMUM AND 10,00 MILLIMETERS MAXIMUM | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267/9, SCHLUESSEL A3P ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE AND ZINC | | TEST DATA DOCUMENT | D8286-DIN6798 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
|
|