|
|
|
National Stock Number:
5310-12-161-5778
Federal Supply Class:
5310
National Item Identification Number:
121615778
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 100332-10200-44 | C2311 | BUNDESAMT FUER AUSRUESTUNG, INFORMATIONSTECHNIK UND NUTZUNG DER BUNDESWEHR (BAAINBW) - BENUTZUNGSRECHTE AN TECHNISCHEN U | | 100332-10200-44 | D2396 | RHEINMETALL WAFFE MUNITION GMBH | | 100332-10200.44 | D2396 | RHEINMETALL WAFFE MUNITION GMBH | | 338249 | D2418 | FLENDER, A. FRIEDRICH AG | | 338249 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | DIN988-S28X40 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | S28X40DIN988 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | SS28X40X2 | D8090 | SEEGER-ORBIS GMBH & CO. OHG |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 44,0 ROCKWELL C MINIMUM AND 49,0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 28,065 MILLIMETERS MINIMUM AND 28,275 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17222 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 39,67 MILLIMETERS MINIMUM AND 39,92 MILLIMETERS MAXIMUM | | TEST DATA DOCUMENT | D8286-DIN988/MAR90/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THICKNESS | 1,95 MILLIMETERS MINIMUM AND 2,00 MILLIMETERS MAXIMUM |
|
|