|
|
|
National Stock Number:
5310-12-163-3227
Federal Supply Class:
5310
National Item Identification Number:
121633227
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 060001075 | D8124 | ZF FRIEDRICHSHAFEN AG | | 0630 001 075 | D8124 | ZF FRIEDRICHSHAFEN AG | | 0630 001 075 | K8633 | ZF SERVICES UK LIMITED | | 093087700 | S0123 | ELBIT SYSTEMS LTD. | | 100CP3352 | U5612 | LEYLAND TRUCKS LTD FOR SPARE PARTS S E U6425 | | 10390350 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 15009774 | Z8518 | BAE SYSTEMS AUSTRALIA LIMITED | | 8-4DIN125STB3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 8-4DIN125STGALCD8MTCC | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 91117456 | U0724 | VAUXHALL AFTERSALES DBA INFO-TBILISI | | 93-877 | 1511A | SOLTAM SYSTEMS LTD. | | A8,4DIN125-ST-B3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | A8-4DIN125STB3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | A8-4DIN125STGALCD8MTCC | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN 125-08.4 ST-B2D | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN 125-08.4 ST-B2D | S3151 | SOLTAM SYSTEMS LTD. DBA SOLTAM LTD. | | DIN EN ISO 7090 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN125-8,4-ST-B3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN125-A8,4-140HV-B3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN125-A8,4-ST-B3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | Y106 126 08 | U0747 | PACCAR PARTS U.K. LIMITED |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 140,0 VICKERS OR FIRTH DIAMOND PYRAMID MINIMUM AND 250,0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM | | HOLE DIAMETER | 8,4 MILLIMETERS NOMINAL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 30,0 DEGREES MINIMUM AND 45,0 DEGREES MAXIMUM | | OVERALL DIAMETER | 16,0 MILLIMETERS NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ISO4042, SCHLUESSEL B3C ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TEST DATA DOCUMENT | D8286-DIN125 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THICKNESS | 1,6 MILLIMETERS NOMINAL |
|
|