|
|
|
National Stock Number:
5310-12-167-0290
Federal Supply Class:
5310
National Item Identification Number:
121670290
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10334882 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 121000005 | C2773 | SCHLEIFRING UND APPARATEBAU GMBH DBA SCHLEIFRING GMBH | | 2522 600 83182 | D9645 | THALES ELECTRONIC SYSTEMS GMBH DIV NAVAL | | 30447 | C3328 | WILLIBRORD LOESING FILTERTECHNIK E.K. | | 30447 | U8164 | SEPAR DISTRIBUTION UK | | 5310-001370 | 0131B | SANTA BARBARA SISTEMAS SA | | 5310001370 | 0125B | GENERAL DYNAMICS EUROPEAN LANDSYSTEMS - SANTA BARBARA SISTEMAS SA | | 5310PL0236532 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 6-261-0104 | D0589 | BUCHER MUNICIPAL GMBH DBA GMBH BUCHER-SCHOERLING | | 6261-0104 | D0589 | BUCHER MUNICIPAL GMBH DBA GMBH BUCHER-SCHOERLING | | 90705-05310RS | 0291H | ROSOMAK S.A | | B5,3DIN125-A2-70 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | B5-3DIN125A2 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN125-5,3-A2-70 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN125-B5,3-140HV-A2 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN125-B5,3-A2-70 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 140,0 VICKERS OR FIRTH DIAMOND PYRAMID MINIMUM AND 250,0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM | | HOLE DIAMETER | 5,3 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN267/11 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP A2 | | PERIPHERAL SHAPE STYLE | ROUND | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 45,0 DEGREES NOMINAL | | OVERALL DIAMETER | 10,0 MILLIMETERS NOMINAL | | TEST DATA DOCUMENT | D8286-DIN125 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THICKNESS | 1,0 MILLIMETERS NOMINAL |
|
|