|
|
|
National Stock Number:
5310-12-172-8175
Federal Supply Class:
5310
National Item Identification Number:
121728175
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| 39GA0043E306-2 | D1379 | B/E AEROSPACE SYSTEMS GMBH | | 39GA0043E306-2 | D2269 | PILLER GERMANY GMBH & CO. KG | | 42182-31331-01 | D1839 | BUNDESAMT FUER AUSRUESTUNG, |
|
Techincal Specification:
| HOLE DIAMETER | 26,0 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1623 BESCHAFFENHEIT 04 | | MATERIAL THICKNESS | 1,0 MILLIMETERS NOMINAL | | MATERIAL | STEEL COMP 1.0333 | | OUTSIDE DIAMETER | 55,0 MILLIMETERS NOMINAL | | RECESS ANGLE | 90,0 DEGREES NOMINAL | | SHOULDER DIAMETER | 35,0 MILLIMETERS NOMINAL | | SHOULDER HEIGHT | 0,8 MILLIMETERS NOMINAL | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | TEST DATA DOCUMENT | D1379-39GA0043E306.2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|