5310-12-175-7423 WASHER,FLAT Index 2910-12-175-7513 INJECTOR ASSEMBLY,FUEL

National Stock Number:
5310-12-175-7426

Federal Supply Class:
5310

National Item Identification Number:
121757426

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
005130172D0235ZEPPELIN MOBILE SYSTEME GMBH
04094Z1C07WURTH AUSTRALIA PTY LTD
04250520941451D2732SCHRAUBEN UND DRAHT UNION GMBH &CO. KG
0950033D1765HAGENUK MARINEKOMMUNIKATION GMBH
10001948A486GNIMIKKEISTOKESKUS NCB FINLAND
114025D8095GOODRICH LIGHTING SYSTEMS GMBH & CO KG
125-2-4.3C9224WAGENER & SIMON WASI GMBH & CO. KG
1253204S7023BOSSARD LTD FASTENERS
125M4-A215526METRIC AND MULTISTANDARD COMPONENTS CORP
223008D0327SELEX ES GMBH
25 100-005D9853ROCKWELL COLLINS DEUTSCHLAND GMBH
25100-005D9853ROCKWELL COLLINS DEUTSCHLAND GMBH
2522 600 83026D9645THALES ELECTRONIC SYSTEMS GMBH DIV NAVAL
272.519 272D3683JENOPTIK ADVANCED SYSTEMS GMBH
273.519 272C4338ATLAS ELEKTRONIK GMBH
280099H2987SUN TEST SYSTEMS B.V.
341080H0212KONINKLIJKE FABRIEK INVENTUM B.V.
35.01251.500431D1837WILH. LAMBRECHT GMBH
4,3DIN125A2D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
4-3DIN125-1-4301D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
4-3DIN125A2D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
4-3DIN125X5CRNI189D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
41742D0079PARKER HANNIFIN GMBHZWEIGNIEDERLASSUNG WIESBADEN
51420040001H0T26FABORY NEDERLAND
51420040001H3620FABORY NEDERLAND
53100006720125BGENERAL DYNAMICS EUROPEAN LANDSYSTEMS - SANTA BARBARA SISTEMAS SA
5310PL02365119009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
7830-063D8009TADANO FAUN GMBH
7830063D8009TADANO FAUN GMBH
7S341080H0212KONINKLIJKE FABRIEK INVENTUM B.V.
90705-04310RS0291HROSOMAK S.A
91-003-3607D8290DELTA ENERGY SYSTEMS (GERMANY) GMBH
9645012130177BINDRA SISTEMAS, SOCIEDAD ANONIMA
9905201D8120KODAK VERWALTUNG AG
A4,3DIN125-1.4301D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
A4,3DIN125-A2D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
A4,3DIN125-A2-70D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
A4,3DIN125A2D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
A4-3DIN125-1-4301D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
A4-3DIN125A2D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
A4-3DIN125X5CRNI189D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
BN670-M4S7023BOSSARD LTD FASTENERS
BOROST0347B0708COCKERILL MAINTENANCE & INGENIERIE
DIN 125-A2 415526METRIC AND MULTISTANDARD COMPONENTS CORP
DIN125-A2SE060AEROFLO (C SIR)
DIN125-A4,3-140HV-A2D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125-A4,3-A2D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125-A4,3-A2D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
DIN125-A4,3-A2-70D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125-A4.3-A215526METRIC AND MULTISTANDARD COMPONENTS CORP
DIN125-A4.3-A2D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125A4-3-1-4301D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125A4-3X5CRN1189D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125A4-3X5CRNI189D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
DIN125AA2M40VKD6MR METRIC INC
DIN125AA2M4D8286DIN DEUTSCHES INSTITUT FUER NORMUNGEV
FWSSM1040908-01Z4732HAULMARK TRAILERS (AUSTRALIA) PTY LTD
G3A20012504C6177FISCHER PANDA GMBH
S1/40D0617ACTIVE ANTENNA SYSTEMS AAS GMBH
TA003552D0350AESCULAP KG


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HARDNESS RATING140,0 VICKERS OR FIRTH DIAMOND PYRAMID MINIMUM AND 250,0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM
HOLE DIAMETER4,3 MILLIMETERS NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONDIN267/11 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP A2
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER9,0 MILLIMETERS NOMINAL
TEST DATA DOCUMENTD8286-DIN125 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
THICKNESS0,8 MILLIMETERS NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us