|
|
|
National Stock Number:
5310-12-180-7043
Federal Supply Class:
5310
National Item Identification Number:
121807043
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 04473 | Z1C07 | WURTH AUSTRALIA PTY LTD | | 236280308 | A6719 | THALES ITALIA SPA | | 450901-4686-030 | D4856 | NORTHROP GRUMMAN LITEF GMBH DBA LITEF | | 8089004 | A6719 | THALES ITALIA SPA | | B3DIN127-A2 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | B3DIN127A2 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | BN672 M3 | S7023 | BOSSARD LTD FASTENERS | | DIN127-B3-A2 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN127B-A2-M3 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | RG-SPG-DIN127-B-A2-D3,1 | Z1C07 | WURTH AUSTRALIA PTY LTD |
|
Techincal Specification:
| HOLE DIAMETER | 3.1 MILLIMETERS MINIMUM AND 3.4 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN267/11 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL THICKNESS | 0.7 MILLIMETERS MINIMUM AND 0.9 MILLIMETERS MAXIMUM | | MATERIAL | STEEL COMP A2 | | OUTSIDE DIAMETER | 6.2 MILLIMETERS MAXIMUM | | SPECIFICATION/STANDARD DATA | 8286-DIN127/OKT87/ MANUFACTURERS SOURCE CONTROL |
|