|
|
|
National Stock Number:
5310-12-192-5415
Federal Supply Class:
5310
National Item Identification Number:
121925415
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0110 7548 | 62445 | DEUTZ CORPORATION | | 0110 7548 | D2689 | DEUTZ AG | | 0110 7548 | F5878 | DEUTZ FRANCE SAS | | 1107548 | D2689 | DEUTZ AG | | 1107548ES8823-08 | D2689 | DEUTZ AG | | 1403274 | 07443 | LANDOLL CORPORATION DBA LANDOLL CORPORATION DREXEL DIVISION DIV DREXEL | | 6150390010 | D9434 | RENK AKTIENGESELLSCHAFT | | 8,4DIN433-ST50-A3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN433-8,4-200HV-A3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN433-8,4-ST50-A3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DZ01107548 | C8898 | WAERTSILAE DEUTSCHLAND GMBH | | N 3502 222 5S | C2463 | RHEINMETALL SOLDIER ELECTRONICS GMBH | | N 3502 222 5S | S3092 | RHEINMETALL AIR DEFENCE AG | | N35022225S | C2463 | RHEINMETALL SOLDIER ELECTRONICS GMBH | | N35022225S | S3092 | RHEINMETALL AIR DEFENCE AG |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 200,0 VICKERS OR FIRTH DIAMOND PYRAMID MINIMUM AND 250,0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM | | HOLE DIAMETER | 8,4 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1652 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0531 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 15,0 MILLIMETERS NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ISO4042, SCHLUESSEL A3C ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL | | TEST DATA DOCUMENT | D8286-DIN433 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THICKNESS | 1,6 MILLIMETERS NOMINAL |
|
|