5310-14-222-8732 WASHER,RECESSED Index 5340-14-224-4178 CLAMP,LOOP

National Stock Number:
5310-14-224-1170

Federal Supply Class:
5310

National Item Identification Number:
142241170

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
06520P004008F5448CEFA
1708F0302SAFRAN TRANSMISSION SYSTEMS
23111CA080F0111BUREAU NORMALISATION AERONAUTIQUEESPACE
23111CA080F0188BLANC AERO INDUSTRIES - GROUPE LISIAEROSPACE
23111CA080F0236SAINT CHAMOND GRANAT SA
23111CA080F0434ALIGN AEROSPACE FRANCE SAS
23111CA080F1236PREAULT TECHNOLOGIES
23111CA080F4957SAFRAN VENTILATION SYSTEMS
23111CA080F6760DEMAT SA
23111CA080F7411MECAERO ARCONIC FASTENING SYSTEMS AND RINGS TOULOUSE
23111CA080PAF0111BUREAU NORMALISATION AERONAUTIQUEESPACE
3036-194F1688GOODRICH ACTUATION SYSTEMS SAS VERNON
3036-194F6103LUCAS FRANCE SA DIV AEROSPACE FRANCE
3036-194FA3T0LUCAS AEROSPACE FMS SAS FILIALE DE LUCAS FRANCE SA
3111CA080PAF0112ASSOCIATION FRANCAISE DE NORMALISATION
401536F0302SAFRAN TRANSMISSION SYSTEMS
F300 0T 024 8748F6647SERVICE CENTRAL DES ACHATS DE LA MAINTENANCE
L23111-80CAF0111BUREAU NORMALISATION AERONAUTIQUEESPACE


Techincal Specification:
HEAT TREATMENTAS FABRICATED
MATERIAL DOCUMENT AND CLASSIFICATIONF3025 AIR 9160C MIL STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP Z2CN18-10
MINIMUM TENSILE STRENGTH440.0 NEWTONS PER SQUARE MILLIMETER
MINIMUM YIELD STRENGTH170.0 NEWTONS PER SQUARE MILLIMETER
OVERALL DIAMETER16.0 MILLIMETERS NOMINAL
THICKNESS1.5 MILLIMETERS NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us