|
|
|
National Stock Number:
5310-14-386-4395
Federal Supply Class:
5310
National Item Identification Number:
143864395
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 23111DB070 | F0111 | BUREAU NORMALISATION AERONAUTIQUEESPACE | | 23111DB070 | F0188 | BLANC AERO INDUSTRIES - GROUPE LISIAEROSPACE | | 23111DB070 | F0236 | SAINT CHAMOND GRANAT SA | | 23111DB070 | F0434 | ALIGN AEROSPACE FRANCE SAS | | L23111-70DB | F0111 | BUREAU NORMALISATION AERONAUTIQUEESPACE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 7.25 MILLIMETERS MINIMUM AND 7.47 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | F3025 AIR 9150B MIL STD 1ST MATERIAL RESPONSE OVERALL OR F3025 AIR 3350C MIL STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 5183 OVERALL OR ALUMINUM ALLOY 5356 OVERALL | | III MINIMUM TENSILE STRENGTH | 280 NEWTONS PER SQUARE MILLIMETER | | III MINIMUM YIELD STRENGTH | 140 NEWTONS PER SQUARE MILLIMETER | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 1.5 MILLIMETERS NOMINAL |
|
|