5995-14-431-9134 CORD,SPECIAL Index 5315-14-431-9838 PIN,SHOULDER,HEADLESS

National Stock Number:
5310-14-431-9247

Federal Supply Class:
5310

National Item Identification Number:
144319247

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
0238909D00F0555MBDA FRANCE
0412 4FA1L5WURTH FRANCE
10192405A486GNIMIKKEISTOKESKUS NCB FINLAND
192323286FAQ15SAFRAN ELECTRONICS & DEFENSE
590Z0040U3F1549ARTUS
779530120304 0000VNCB HUNGARY HONVEDSEGI EGYSEGES TERMEKKOD
903520ZU4F0052THALES DMS FRANCE SAS
903520ZU4F6217DASSAULT ELECTRONIQUE
99012777F9111THALES AVS FRANCE SAS
9915168294404RAYTHEON COMPANY
99151682D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
99151682F0057THALES SIX GTS FRANCE SAS
99151682F6137SAFRAN LANDING SYSTEMS
99151682F6481THALES SA
99151682F6495ESTERLINE AVIONICS & CONTROLS FRANC
99160805F6481THALES SA
A1236258F9111THALES AVS FRANCE SAS
A190663F0556TDA ARMEMENTS SAS
A210603000517F4749CONSTRUCTIONS INDUSTRIELLESMEDITERRANEE
E25514A40ZGAPAF1236PREAULT TECHNOLOGIES
E25514A40ZGAPAF4796ETABLISSEMENTS BD
E25514A40ZGAPAF7411MECAERO ARCONIC FASTENING SYSTEMS AND RINGS TOULOUSE
E25514A40ZGAPAF8300CIMD (CENTRE D'IDENTIFICATION DESMATERIELS DE LA DEFENSE)
E25514A40ZHAPAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
E25514A40ZTAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
E25514A40ZTAF0434ALIGN AEROSPACE FRANCE SAS
E25514A40ZTAF6760DEMAT SA
E25514A40ZTAF7411MECAERO ARCONIC FASTENING SYSTEMS AND RINGS TOULOUSE
E25514A40ZTAPAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
E25514A40ZTAPAF1236PREAULT TECHNOLOGIES
E25514A40ZTAPAF4796ETABLISSEMENTS BD
E25514A40ZTAPAF6760DEMAT SA
E25514A40ZTAPAF7411MECAERO ARCONIC FASTENING SYSTEMS AND RINGS TOULOUSE
E25514E40ZHAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
F25514A0ZGAPAF1236PREAULT TECHNOLOGIES
R9ZG040APAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
R9ZG040APAF8300CIMD (CENTRE D'IDENTIFICATION DESMATERIELS DE LA DEFENSE)
R9ZH040APAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
R9ZT040AF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
R9ZT040APAF0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION
RONDELLE Z4A A4-160HV E25514F6481THALES SA
V053040JF0296SAFRAN ELECTRICAL & POWER CHATOU SAS
Z4A4NFE25-514F0110AFNOR ASSOCIATION FRANCAISE DE NORMALISATION


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER4.3 MILLIMETERS MINIMUM AND 4.48 MILLIMETERS MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMANUEL 14-G1 CODE ZT MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL STAINLESS OVERALL
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER7.64 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
TEST DATA DOCUMENTF0110 E27-003 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
THICKNESS0.73 MILLIMETERS MINIMUM AND 0.87 MILLIMETERS MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us