|
|
|
National Stock Number:
5310-17-108-8599
Federal Supply Class:
5310
National Item Identification Number:
171088599
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| T003001372 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | T003001372 | H0R68 | LIPS PROPTECH B.V. | | T003001372 | H1512 | WARTSILA NETHERLANDS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 150.1 MILLIMETERS MINIMUM AND 150.2 MILLIMETERS MAXIMUM | | MATERIAL | STEEL COMP 1.0601 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | OVERALL DIAMETER | 260.0 MILLIMETERS NOMINAL | | SPECIAL FEATURES | LENGTE AFSCHUINING 25 MM | | THICKNESS | 43.9 MILLIMETERS MINIMUM AND 44.1 MILLIMETERS MAXIMUM |
|
|