|
|
|
National Stock Number:
5315-12-125-7770
Federal Supply Class:
5315
National Item Identification Number:
121257770
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 010481 | D2396 | RHEINMETALL WAFFE MUNITION GMBH | | 209905 | D0055 | FORD-WERKE GMBH | | 2114 2012-180 | AC90N | BAE SYSTEMS HAGGLUNDS AKTIEBOLAG | | 2114 2012-180 | S3465 | BAE SYSTEMS HAGGLUNDS AB | | 3,2X18DIN94-ST-A2P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 3,2X18DIN94-ST-ZN5CX | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 3-2X18DIN94STGALZN6 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 3X18DIN94STGALZN6 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 72016GS8 | D0055 | FORD-WERKE GMBH | | 942166 | D9913 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS-BRIDGE SYSTEMS GMBH | | DIN94-3,2X18-ST-A2P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-3,2X18-ST-A3P | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| DIAMETER | 3.2 MILLIMETERS NOMINAL | | MATERIAL | STEEL OVERALL | | POINT TYPE | EXTENDED PRONG SQUARE CUT OR EXTENDED PRONG CHISEL | | STYLE DESIGNATOR | STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ISO 4042, A3P ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL AND CHROMATE OVERALL | | UNDERLOOP LENGTH | 18.0 MILLIMETERS NOMINAL |
|
|