|
|
|
National Stock Number:
5315-12-156-4401
Federal Supply Class:
5315
National Item Identification Number:
121564401
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 000094003004 | D8046 | DAIMLER AG | | 000094003004 | D8266 | MTU FRIEDRICHSHAFEN GMBH | | 000094003004 | Y9992 | NAVAL MATERIAL HEADQUARTERS RMN | | 000094003220 | D8046 | DAIMLER AG | | 000094003222 | D8046 | DAIMLER AG | | 000094003222 | Y9992 | NAVAL MATERIAL HEADQUARTERS RMN | | 0631 701 027 | D8124 | ZF FRIEDRICHSHAFEN AG | | 0631701027 | D8124 | ZF FRIEDRICHSHAFEN AG | | 0842221 | D8009 | TADANO FAUN GMBH | | 12716 | D8061 | CNH BAUMASCHINEN GMBH | | 176-0148 | D0263 | FAUN-FRISCH BAUMASCHINEN GMBH | | 3,2X25DIN94-ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 3-2X25DIN94ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 30-720-001 | B1541 | THE EUROPEAN VAN COMPANY NV | | 4155-748 | D8009 | TADANO FAUN GMBH | | 51601 | D0001 | MUEHLSTAEDT, KURT | | 51601 | D1486 | JOS. L. MEYER GMBH & CO. | | 5315PL0896205 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | DIN94-3,2X25 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-3,2X25-ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-3,2X25ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-3X25-ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | N0125321 | D9134 | VOLKSWAGEN AG DBA VOLKSWAGEN AG DIV VOLKSWAGEN GROUP FLEET INTERNATIONAL |
|
Techincal Specification:
| DIAMETER | 2.7 MILLIMETERS MINIMUM AND 2.9 MILLIMETERS MAXIMUM | | MATERIAL | STEEL OVERALL | | POINT TYPE | EXTENDED PRONG SQUARE CUT OR EXTENDED PRONG CHISEL | | STYLE DESIGNATOR | STANDARD | | TEST DATA DOCUMENT | D8286-DIN94/SE+83/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDERLOOP LENGTH | 24.00 MILLIMETERS MINIMUM AND 26.00 MILLIMETERS MAXIMUM |
|
|