|
|
|
National Stock Number:
5315-12-156-4637
Federal Supply Class:
5315
National Item Identification Number:
121564637
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 000094004056 | D8046 | DAIMLER AG | | 39310.040.028 | B1603 | COMBORI NV | | 4X28DIN94-ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 4X28DIN94ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 4X30DIN94ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 5315PL0582190 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | DIN94-4X28-ST | 0141B | NAVANTIA, S.A., S.M.E. | | DIN94-4X28-ST | 409BB | NAVANTIA - PROPULSION Y ENERGIAMOTORES - CARTAGENA | | DIN94-4X28-ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-156-4637 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| DIAMETER | 4.0 MILLIMETERS NOMINAL AND 3.5 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM | | MATERIAL | STEEL OVERALL | | POINT TYPE | EXTENDED PRONG SQUARE CUT OR EXTENDED PRONG CHISEL | | STYLE DESIGNATOR | STANDARD | | TEST DATA DOCUMENT | D8286-DIN94/SE+83/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDERLOOP LENGTH | 27.00 MILLIMETERS MINIMUM AND 29.00 MILLIMETERS MAXIMUM |
|
|