|
|
|
National Stock Number:
5315-12-165-1980
Federal Supply Class:
5315
National Item Identification Number:
121651980
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 1,6X8DIN94-A4 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 1-6X8DIN94A4 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | D94-E80-R865 | C0628 | EADS DEUTSCHLAND GMBH | | D94E80R865 | C0628 | EADS DEUTSCHLAND GMBH | | DIN94-1,6X8-1.4305 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-1,6X8-A4-50 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-1,6X8-A4-70 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-165-1980 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M | | NO PRIMARY REF 121651980 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| DIAMETER | 1.3 MILLIMETERS MINIMUM AND 1.4 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17440, FESTIGKEIT 70 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP A4 OVERALL | | POINT TYPE | EXTENDED PRONG SQUARE CUT OR EXTENDED PRONG CHISEL | | STYLE DESIGNATOR | STANDARD | | TEST DATA DOCUMENT | D8286-DIN94/SE+83/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDERLOOP LENGTH | 7.25 MILLIMETERS MINIMUM AND 8.75 MILLIMETERS MAXIMUM |
|
|