|
|
|
National Stock Number:
5315-12-180-3626
Federal Supply Class:
5315
National Item Identification Number:
121803626
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 027073606 | D9913 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS-BRIDGE SYSTEMS GMBH |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 5,0 MILLIMETERS NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 65,0 MILLIMETERS NOMINAL | | FIRST END TAPER ANGLE | 45,0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 1,5 MILLIMETERS NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 1,6 MILLIMETERS NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17350, X22CRNI17, 1,2787 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL STAINLESS OVERALL | | PIN OVERALL DIAMETER | 6,0 MILLIMETERS NOMINAL | | PIN OVERALL LENGTH | 75,0 MILLIMETERS NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 1,6 MILLIMETERS NOMINAL |
|
|