|
|
|
National Stock Number:
5315-12-180-4464
Federal Supply Class:
5315
National Item Identification Number:
121804464
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 117436 | D9913 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS-BRIDGE SYSTEMS GMBH | | B10H11X35DIN1444-ST-A3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | B10H11X35DIN1444STA3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | B10H11X35DIN1444STGALZN8MTCC | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN1444-B10H11X35-ST-A3C | C3689 | MBO OSSWALD GMBH & CO. KG | | DIN1444-B10H11X35-ST-A3C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-180-4464 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M | | NO PRIMARY REF 121804464 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| DIAMETER | 10,0 MILLIMETERS NOMINAL AND 9,910 MILLIMETERS MINIMUM AND 10,000 MILLIMETERS MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 4,50 MILLIMETERS NOMINAL | | CHAMFER LENGTH | 2,00 MILLIMETERS NOMINAL | | FIRST HOLE DIAMETER | 3,20 MILLIMETERS MINIMUM AND 3,38 MILLIMETERS MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 3,850 MILLIMETERS MINIMUM AND 4,150 MILLIMETERS MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1651, 9SMNPB28K ASSN STD 1ST MATERIAL RESPONSE OR DIN1654/17240, CQ35 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1.0718 OR STEEL COMP 1.1172 OVERALL | | PIN HEAD DIAMETER | 17,57 MILLIMETERS MINIMUM AND 18,00 MILLIMETERS MAXIMUM | | PIN CHAMFER ANGLE | 30,0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DIN267TEIL9, SCHLUESSEL A3C ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE ZINC OVERALL | | TEST DATA DOCUMENT | D8286-DIN1444/MAR74/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDER HEAD LENGTH | 35,0 MILLIMETERS NOMINAL AND 34,50 MILLIMETERS MINIMUM AND 35,50 MILLIMETERS MAXIMUM |
|
|